Map Designer V1.23

User avatar
NiteHawk
Site Admin
Posts: 3610
Joined: Wed Apr 20, 2016 7:33 am

Re: Map Designer

Postby NiteHawk » Wed Jul 13, 2016 5:02 pm

Kruell wrote:
nitestalker wrote:I did all this and compared it, I had to disable defender to download it again, the files hashes match 100% but its still giving the same error when I try to install.


You have Windows 10 which I have very limited experience with. Do you have a full version of Windows 10 or did you get the free upgrade (an important distinction)? Either way, do a manual windows update to make sure you have the most current defender files. Do a disk scan on your system to make sure it isn't an index forcing the file onto bad sectors. Also, use an "online" virus scanner like what can be found at http://housecall.trendmicro.com/ so advanced viral programs can't corrupt your scanner kernel. If all that fails and you still can't install it, save it to a different directory (using a different browser if you have one) and try from there. If you have a download manager it may be attaching "ghost bits" to the file and triggering defender.


The file works in windows 10, and is supported in any version anyways. I'm using a win10 machine 8)

User avatar
nitestalker
Posts: 24
Joined: Tue Jun 14, 2016 1:19 am

Re: Map Designer

Postby nitestalker » Wed Jul 13, 2016 5:53 pm

Kruell wrote:
You have Windows 10 which I have very limited experience with. Do you have a full version of Windows 10 or did you get the free upgrade (an important distinction)? Either way, do a manual windows update to make sure you have the most current defender files. Do a disk scan on your system to make sure it isn't an index forcing the file onto bad sectors. Also, use an "online" virus scanner like what can be found at http://housecall.trendmicro.com/ so advanced viral programs can't corrupt your scanner kernel. If all that fails and you still can't install it, save it to a different directory (using a different browser if you have one) and try from there. If you have a download manager it may be attaching "ghost bits" to the file and triggering defender.


I ran the scan with no problems found, disabled windows defender and downloaded it on 3 different browsers and same thing. However I was able to extract the files from the .exe file and place them in a folder and it works now, with nothing being detected as a virus or any other issues that have come up so far.

User avatar
NiteHawk
Site Admin
Posts: 3610
Joined: Wed Apr 20, 2016 7:33 am

Re: Map Designer

Postby NiteHawk » Wed Aug 17, 2016 7:08 am

Mud Map Designer v1.21 released! Feel free to grab it. Should have a bunch of fixes!

http://chrisvall.com/coding/mud_map_designer_121

User avatar
Kawasaki
Posts: 246
Joined: Wed Apr 20, 2016 9:53 am
Location: Ohio
Contact:

Re: Map Designer

Postby Kawasaki » Sat Aug 20, 2016 1:14 am

Error when I attempt to open a .kmap from another user.

Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue If you click Quit, the application will close immediately.

Index was outside the bounds of the array.

Code: Select all

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
   at MapEditor.frmMain.frmMain_Paint(Object sender, PaintEventArgs e)
   at System.Windows.Forms.Control.OnPaint(PaintEventArgs e)
   at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer)
   at System.Windows.Forms.Control.WmPaint(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8689 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Map Designer
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/Map%20Designer/Map%20Designer.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8670 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8690 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8681 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.VisualBasic
    Assembly Version: 8.0.0.0
    Win32 Version: 8.0.50727.8670 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Core
    Assembly Version: 3.5.0.0
    Win32 Version: 3.5.30729.8693 built by: QFE
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8679 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

User avatar
NiteHawk
Site Admin
Posts: 3610
Joined: Wed Apr 20, 2016 7:33 am

Re: Map Designer

Postby NiteHawk » Sat Aug 20, 2016 4:32 am

Kawasaki wrote:Error when I attempt to open a .kmap from another user.

Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue If you click Quit, the application will close immediately.

Index was outside the bounds of the array.

Code: Select all

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
   at MapEditor.frmMain.frmMain_Paint(Object sender, PaintEventArgs e)
   at System.Windows.Forms.Control.OnPaint(PaintEventArgs e)
   at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer)
   at System.Windows.Forms.Control.WmPaint(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8689 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Map Designer
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/Map%20Designer/Map%20Designer.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8670 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8690 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8681 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.VisualBasic
    Assembly Version: 8.0.0.0
    Win32 Version: 8.0.50727.8670 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Core
    Assembly Version: 3.5.0.0
    Win32 Version: 3.5.30729.8693 built by: QFE
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.8679 (QFE.050727-8600)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.


Do they have the updated version? Do you as well? The map editor fix I released a day ago.

I'd prefer to have the map too. the info doesn't give much.

User avatar
NiteHawk
Site Admin
Posts: 3610
Joined: Wed Apr 20, 2016 7:33 am

Re: Map Designer

Postby NiteHawk » Mon Aug 22, 2016 12:46 pm

Mud Map Designer v1.22 released! There was an issue when opening maps with different icons. This should be fixed now.

http://chrisvall.com/coding/mud_map_designer_122

User avatar
NiteHawk
Site Admin
Posts: 3610
Joined: Wed Apr 20, 2016 7:33 am

Re: Map Designer V1.23

Postby NiteHawk » Tue Sep 27, 2016 11:18 am

http://chrisvall.com/coding/mud_map_designer_123 is out now.

Fixed the mouse scroll wheel, using ladders, and a few other things that had minor issues. All crashes should now be resolved now, shouldn't have any more problems.

zyloch
Posts: 6
Joined: Sun Nov 27, 2016 2:34 pm

Re: Map Designer V1.23

Postby zyloch » Sun Nov 27, 2016 2:38 pm

The SmartScreen Filter is on the fritz with this Map Designer. Any idea why?

User avatar
NiteHawk
Site Admin
Posts: 3610
Joined: Wed Apr 20, 2016 7:33 am

Re: Map Designer V1.23

Postby NiteHawk » Sun Nov 27, 2016 3:19 pm

zyloch wrote:The SmartScreen Filter is on the fritz with this Map Designer. Any idea why?

Someone from another thread commented that it is probably because of the key logging system it uses when you are running around. When you enable the logging (so it maps out for you when you press keys), some malware programs scream and think it's keylogging your info when it is just logging up/down/left/right type deal. It is a false positive.

There is apparently a way to submit a false positive I believe within the program. If you could do this that would be great so that they check the false positive/program and clear the issue.

User avatar
NiteHawk
Site Admin
Posts: 3610
Joined: Wed Apr 20, 2016 7:33 am

Re: Map Designer V1.23

Postby NiteHawk » Fri Jan 26, 2018 11:08 am

Link updated.


Return to “Content”

Who is online

Users browsing this forum: No registered users and 1 guest